Advantages and Features of TZC Cone Crusher

Advantages and Features of TZC cone crusher:
1. Oil lubrication system-air cooling
There are three methoids of cooling, by water, air and air-condition. At this moment our standard configuration is air cooling. Cooling by air-condition will cause trouble
in maintenance, so we don't recommend this way.
2. Bigger crushig
Movable cone swing angle reach 70mm (we are the fist supplier who can achieve this point), thus our TZC cone crusher is 30% more capacity than other cone crushers.
3. Advanced sealing device
These aling ring is sticked to the movable cone all the time when operated, so TZC cone crusher no need water or grease for sealing. By this way, the kwy parts of TZC cone crusher have 2-3 times using time compared to other cone crushers.

4. Laminated crushing, high capacity, leass wearing
Optimize the crushing cavity which guarantee the wearing part wear uniformly. By this way, the wearing parts using efficiency can achieve >75% and not affect the product result. So it can save a lot for operation cost,
5. Easy to replace the wearing part.
TZC cone crusher wearing parts and related surface are all manufactured by precise machining; and they are fixed without adhesives, easy for replacement and save time.
6. Use NSK bearing for drive shaft, longer lifetime.
7. Hydraulic system for cavity cleaning
When cavity was blocked by material, no need to disassemble the cavity, clean the cavity by hydraulic device which save a lot of time.
8. Small vibration, TZC cone crusher can be fixed in the mobile trailer.
http://www.jawcrushertz.com

评论

发表评论

此博客中的热门博文

Stone Jaw Crusher

图片
Application: stone mining, metallurgy industry, building material, highway, railway, and chemical, etc. Structure: Tarzan Stone Jaw crusher is composed of frame, rotating jaw, eccentric shaft, jaw plate and plate knee, etc. The motor drives the eccentric shaft through V-belt, making the movable jaw do periodic movement according to the well timed track. Rotating jaw adopts moulding cast steel, which has movable jaw plate at front, the above part hang on the frame by the eccentric shaft and rotating shaft, the under part bear on the plate. This series jaw crusher machine adopts curve-movement compression way to crush the material.Electric motor drives belt and belt wheel to set the movable plate in moving up and down through eccentric shaft.The angle between toggle plate and moving jaw plate increases when moving jaw moves.When the movable plate descends, the angle formed by toggle and movable plate will became narrower.Pulled by rod and spring, the movable plate will move ap...
阅读全文

Working Principle of VSI Sand Making Machine

图片
Working Principle of Shanghai Tarzan VSI Sand Making Mchine The materials fall into the impeller from the head of the machine and with the function of high-speed centrifugal force, they strongly hit against and highly grind the other parts of the materials bypass flowing around the impeller in an umbrella form. After mutual impact and between the impeller and the machine shell, the materials will move like a vortex and will be impacted, rubbed and pulverized many times. Then they will come to the required fineness controlled by screening equipment, and discharge from the bottom of the VSI Sand maker for VSI sand making machine price model Max feed size (mm) Rotor diameter (mm) Rotor speed (r/mim) capacity (t/h) power (kw) weight (t) Dimension (mm) TVSI-600 40 713 1600 120 160 6.5 3670x1821x2100 TVSI-800 40 800 1200-1600 180 200 7.9 4037x2070x2375 TVSI-1000 40 1000 1200-1400 240 315 12 4890x2386x2678 TVSI-85G 50 840 1200-1400 350 315 14 4100X2150X2700 TVSI-95G 60 840...
阅读全文